|
The machine 's memory when the heart is damaged , symptoms may be caused by "white grating, no boot, no character ", etc., in accordance with the method of entering D mode to see whether it can re- write data. If you do not boot , you need to stand inside the machine control circuit to force open ( when there is no character display can not be operated , only new ones ) , after the above operation, the machine is not working properly , it is a bad memory , only new ones . For 8000A (5T03) movement , whose memory is overridden method as above, just different individual internal parameter values , changes in its four basic parameters on the table : Item 23 of the initial value ST4 to 18 ; Item 54 V25 's the initial value to 25 ; initial value of item 55 V50 to 50 ; item 59 MOD1 initial value to F7. MOD1 item if you want to S terminal F6. Note : 5T03 memory must be to use the 4T01 will be changing for the better after the above four . Simply replace the memory in the machine , install a 24C04 ( no matter what the movement ) , and then enter the factory D mode to adjust parameters.mCKservice manual download site
mCKservice manual download site
● previous T Series movement There are 5 CPU, which are : ⑴ 87CM38N-3856, for use in heart 3T01, 4T01 machine can store 100 channels.
10 Home Previous 6 7 8 9 10 Next Last |