Zoom 35 ~ 70mm Auto Focus camera, in case of power have the time, batteries, flash symbol appears, the normal action telescopic lens, close the back cover has a motor action, but pressing the shutter -Service Manual Download|Circuit Download|Download Drawings|schematic download|route map download|free download user manual

Your current location：Home > Technical Articles > Camera

Zoom 35 ~ 70mm Auto Focus camera, in case of power have the time, batteries, flash symbol appears, the normal action telescopic lens, close the back cover has a motor action, but pressing the shutter

Time：2014-05-15 07:56:06 Source：Network Author：Unknown Clicks：1343

( 1 ) Turn off the camera , remove the battery , tweezers to remove the top right corner of a small camera and loosen the stopper is removed here long black screw , turn the camera on the back cover , loosen and remove the camera on the left side of the bottom right corner of the black lower a total of three screws , note that the length of the screws , carefully remove the cover and slowly remove the front cover .LV3service manual download site
( 2 ) Note that the main capacitor is fully discharged ( located under the right side of the main capacitor motherboard ) , the use of electric iron heat the flexible substrate under the top of the camera is connected to the left of the spot , then welded wire under the relevant board flash trigger and right power cord ( note prepare records conductor wiring position ) .LV3service manual download site
( 3 ) Loosen and remove the AF of three white retaining screw assembly and flexible substrates screw connection points ( record the position of the flexible substrate Sockets Layer ) .LV3service manual download site
LV3service manual download site

( 4 ) Unscrew and remove the camera is connected to the motherboard CPU and IR3051A flexible substrate and the bottom point of the flexible substrate beneath the fixing screws and make records be separated .LV3service manual download site
( 5 ) Unscrew and remove the bottom of the camera gear splint screws 4 and remove the gear plywood and one of the gears , loosen and remove the roots of the upper left corner and right in the middle of the lens fixing screws , open the back cover , loosen and remove under the lower left corner of the black film frame fixing screws 1 . Note : At this time the entire group of lenses can not be removed from the body , this machine with other models of decomposition is slightly different.LV3service manual download site
( 6 ) Carefully remove the lens barrel dust ring, then gently turn the zoom ring sliding track , you can remove the lens zoom ring from the body of the slide , and pull out the lens assembly .LV3service manual download site
Lens decomposition :LV3service manual download site
( 1 ) Carefully pry out the mirror retainer ring , and then pry out the rear lens group , drawn from the camera lens shutter assembly outer cylinder .

2 1 2 Next Last