ghost also provides many other parameters for our use , such as mirroring encryption, etc. , because they are not required, so do not repeat them once again .

 

 

Third, the recovery CD-ROMs

 

Blue worry comparison lazy , so I hope to restore the process as simple as possible , do not know that you are not also so ~ ! ◎ # ¥ If so , well, the following methods will be another you satisfied.

 

1 Prepare

 

Of course , you need to have before making the CD burner ( Do not tell me you did not ! ) . Burning software is recommended to use nero burning rom.

 

In order to make a recovery CD can be automatically installed in the form of guidance , we also need a CD-ROM boot image in windows me in making a boot floppy on it. But windows me boot floppy , there are many things we do not need , that any deleted, mercilessly ! Need to keep the following documents: ( delete and modify all wrong for all to be completed in the floppy disk, otherwise the situation could not guide will appear )

autoexec.bat

command.com

config.sys

io.sys

msdos.sys

oakcdrom.sys

 

Moreover, you should add two files , mscdex.exe ( the boot disk ebd.cab unpack with winrar can get ) and smartdrv.exe ( or its installation disk can be found in the windows9x/me system ) .

Finally, do not forget to ghost.exe also copied to a floppy disk . ok, so many documents , we need to do some minor modifications , mainly two config.sys and autoexec.bat files . You can modify the contents shown in the following figure :

 

 

autoexec.bat ( red line content to which you made ​​". gho" image file name )

 

This mirror can be used to start an ordinary ide or usb interface drive, if it is ilink (1394) interface or pcmcia card drive, please use the dedicated boot image .

 

2 production

 

a. would just make a good boot floppy disk into the floppy drive, run nero burning rom, select "File" menu in the " open a new file " option. Select "cd-rom ( boot ) " appears in the CD-ROM production types . Tab in the current view using " boot " the default settings .

 

 

b. Select "Label" tab, you can label the disc , publishers and other information for customization in the red box selected area . Other tab the default, after the custom finished, press the "New" button.

 

 

c. would make a good drag an image file from the file browser burn area ( remember the ". gho" burn images with a boot image on the first CD-ROM ) . In the lower part of the window will be prompted to take up the current file disc capacity , in order to facilitate the detection if you always exceeds the rated disc burning capacity.

 

 

After d. drag and drop files , select "File " menu in the "Start Burn CD ."

 

 

e. then ready to burn the software will enter the options screen , blue worry proposal would " write speed " selected 4x, so write the track point relatively deep , the quality of the disc would be better, other default. Then press the " write ." ok, burn began ......

 

f. the end , if you are in a sub-volume parameters using clone , then follow the same method of volume generated by the first disk recorders ". ghs" mirror every turn to burn to a CD can be. ( Contains ". Ghs" disc file can not add boot image made ​​into a bootable cd, so select " Data Disc (iso)" you can type in the production of CD-ROM )

 

When you take out the last disc from the recorder , the production process came to an end . Quickly try it, boot the machine using the first CD to automatically enter the recovery process , you just need to follow the prompts to replace the next disc to resume after the end of the program will automatically restart your computer , is not feeling very relaxed that ?