But the various brands of notebook, removing method is not the same

Below we introduce three notebook mainstream replacement method screen shaft removing

Method:

For Acer; Toshiba; DELL old type disassembly

At present, most of the control panel, open the keyboard is at the top of the cover

Remove the battery

Using a screwdriver, remove the screw on the axle

Use tweezers, carefully open on the left. Remove the panel. You can see the screen shaft

Removal of B shell (frame around the screen.)

Use tweezers to remove rubber gasket. Remove the screws. From the inside to the outside, careful deduction border

Screen shaft normal are also around the screen frame which are connected

With a small screwdriver to dismount

Remove the screen shaft. To replace the new screen axis

Methods two:

Suitable for IBM. Sony; machine disassembly

C shell, first removable touch screen control shell. Removable keyboard

Remove the rear screws. Remove screen shaft door on the shell

Around the screen frame removable method, the same

Use screws to remove screen shaft; to replace the new screen shaft can be

Methods three

For a brand Mini Notebook

Remove the battery

Removable back all the screws. With tweezers. Careful knock. Keyboard

The keyboard the screws

Remove the C shell. You can see the screen shaft

The replacement of the new shell, can be

Note: a A B C D notebook shell. The shell. Screen back to A. Around the screen shell as the B shell

Around the keyboard to keyboard for the D C shell; shell