Panasonic CS - DP801K8 disc in disc machine doesn't work, can into the box and can be loaded in place, but the disc does not turn, the nose displays status information FM radio fault repair methods -Service Manual Download|Circuit Download|Download Drawings|schematic download|route map download|free download user manual

Your current location：Home > Technical Articles > Audio

Panasonic CS - DP801K8 disc in disc machine doesn't work, can into the box and can be loaded in place, but the disc does not turn, the nose displays status information FM radio fault repair methods

Time：2014-06-05 08:34:52 Source：Network Author：Unknown Clicks：1286

Can into the box and tray is loaded from the no. 1, system control at work, but it is dubious that control information transmission is entirely correct, in other words the disc not turn may also be a control circuit have no disc rotation orders or orders are not executed. Assuming normal control function, the laser smudgy probability, treatment should be done first. Ask the owner that the car is just bought second-hand, had already suspended for half a year. According to the principle of easy after the first difficult repair first not teardown, with long tweezers from storehouse door into clean baldheaded, electricity test, CD, monitor images, but the pause is serious, decided to bald a thorough repair. Method is as follows: first, turn on the fixed frame around the two screws removed, in disk drive can free activities, remove the posterior horn of row and video output socket, namely under the desirable in disk drive, and then sent to the repair work on decomposition, steps are as follows. cWxservice manual download site
cWxservice manual download site
cWxservice manual download site
1. The fixed cover around the first three screws removed, written in a flat mouth to change the knife from the back have 2 gap into the OPEN, move the top, to lift up from behind, and hold back up the desirable under roof. cWxservice manual download site
2. Be careful to take the plane heart two damping glue around each set, then remove the central around a damping spring, machine can open heart, but machine heart circuit board and the cover plate of relaxation and control transfer board has a lot of lines to connect, it is put in dish machine mounted when converted into VCD, must be recorded, to prevent accidentally broken hard reset after repair. cWxservice manual download site
(3) unscrewing machine fixed heart left three screws of the circuit, including loading gear above one tablet just pin circuit board, to move its does not interfere with the location of the circuit board out, then load the center of the gear screw, prevent loading gear position changes cause trouble; Loosen the bald head line row inserted and connected to the circuit board right row lock, row line can emerge.

2 1 2 Next Last