Service Manual Transistor Technical Articles CD Download Register Member Login Exit Sign
Home A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
. TV  .  Camera  .  Video camera  .  Notebook  .  Audio  .  Monitor  .  Projector  .  Air conditioning  .  Refrigerator  .  Printer  .  Duplicator  .  Fax machine  .  Mobile  .  Telephone  .  Washing machine  .  Cooker  .  Microwave  .  Other  .  
Your current location£ºHome > Technical Articles > Duplicator

Copier common failure analysis

Time£º2014-01-30 09:33:12  Source£ºNetwork  Author£ºUnknown  Clicks£º13559
  
3 . Collator cause jams
4 . Scanning components cause jams
5 jam caused by a short circuit in the machine
6. Jams caused by improper operation
Specific jam inspection and maintenance:
l. paper stuck in the feeding tract
Cause and Remedy :
( 1 ) feeding clutch control. Adjustment , replacement feeding clutch ;
( 2 ) feeding tract foreign body . Remove foreign bodies ;
( 3 ) Paper deviate blocking cold. Clear the jammed copy paper ;
2 paper card at the separator
Cause and Remedy :
( 1 ) separation with loose, off , off, or separate gas suction , suction force shortage of paper , the paper sticking to the drum or into clean container; replace the separation zone. Adjust the amount of air sucked gas position ;
( 2 ) Paper deviate . Exclude paper deviate failure.
3 . Cleaner frequent jams
Cause and Remedy :
A cleaner in contact with some portion of the photosensitive drum is provided with a grid-like copier bar , which is made of plastic , thus preventing the copy sheet into the role of the cleaner , the normal copy , even if the paper has jammed in this section , the sheet can be easily taken but when the palisade of the damage , the paper goes into the cleaner , the card is very tight and difficult to remove . Then need to make cleaner away from the photosensitive drum , if necessary, remove it from the machine , clear the jam repair or replacement of the palisade , in order to continue the role .
4 . Often in the middle of a jam
Cause and Remedy :
5 on the roll to the drum ( often paper roll onto drums) , check ;
( 1 ) drum separation claws , separated with is good ;
( 2 ) separation of high voltage charging is good ;
( 3 ) side of the paper stiffness than the other surface is very poor , if so, to the contrary , the stiffness or as later were good double-sided paper .