Service Manual Transistor Technical Articles CD Download Register Member Login Exit Sign
Home A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
. TV  .  Camera  .  Video camera  .  Notebook  .  Audio  .  Monitor  .  Projector  .  Air conditioning  .  Refrigerator  .  Printer  .  Duplicator  .  Fax machine  .  Mobile  .  Telephone  .  Washing machine  .  Cooker  .  Microwave  .  Other  .  
Your current location£ºHome > Technical Articles > Duplicator

Copier common failure analysis

Time£º2014-01-30 09:33:12  Source£ºNetwork  Author£ºUnknown  Clicks£º13569
  
33 , the photosensitive drum is not rotated
Cause and Remedy :
This failure occurred in the newly installed machine , or the machine disassembled for maintenance afterwards. This is not the driving gear of the photosensitive drum copier , but by a small circle one end projecting profile slot machine to get stuck on the photosensitive drum wheels . If this file is not down to the tank , the drum will not turn , there is no image on the copy . Another type of gear of the photosensitive drum , and the drum core with a string over a shaft , if the machine does not reach a certain gear portion meshed with the inner gear , the drum shaft is not in place or will not cause rotation of the photosensitive drum without image failure.
Then we should watch the drum is rotating , if not rotate , you should reinstall all components related to the photosensitive drum , some machines during transport , in order to prevent vibration , the drum shaft add one more ring gasket during copying , installing when must be removed , otherwise the failure will occur .
34 , the cleaner clogging
Cause and Remedy :
Cleaner copier with one or both ends of nylon gear, which meshes with the drive gear in the machine , the auger is rotated within the drive cleaner , the cleaning off the toner from the photosensitive drum machine continuously flows close end the waste toner box.
In cleaner blockage , when leaking powder cases, should first check whether there is toner or paper block blocked Feifen pathway. If not, then more for cleaner remote gear ( one or two ) teeth chipping away, unable to drive the auger rotation , then replace the same type of gear .
35 , looking after the power switch on, the operator panel lights do not light the whole machine without any operation.
Cause and Remedy :
1 ) First, with a multimeter ( placed AC500V) to check whether there is AC 220V power outlet mains , if not, check the power supply fuse is broken , such as broken, replace the power supply 220v AC mains outlet , then down to check .