Service Manual Transistor Technical Articles CD Download Register Member Login Exit Sign
Home A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
. TV  .  Camera  .  Video camera  .  Notebook  .  Audio  .  Monitor  .  Projector  .  Air conditioning  .  Refrigerator  .  Printer  .  Duplicator  .  Fax machine  .  Mobile  .  Telephone  .  Washing machine  .  Cooker  .  Microwave  .  Other  .  
Your current location£ºHome > Technical Articles > Duplicator

Copier common failure analysis

Time£º2014-01-30 09:33:12  Source£ºNetwork  Author£ºUnknown  Clicks£º13744
  
Clutch control developer aging or damaged ; replace the clutch .
Developer dislocation or drive gear damage ; reinstall or replace the drive gear in place .
Drum installed in place ; reinstalled.
(C ) , copy the image from time to time
Cause and Remedy :
The reason is that the charge transfer electrode or a connection to the high voltage transformer or high voltage transformer itself is damaged .
Remedy:
Check the back cover can be opened when the machine , remove the electrode socket. After copying the start button is pressed , the socket with a metal part of the electrode touching the metal frame machines , such as the discovery discharge lights sign that the electrode is good. If there is no discharge ignition, the high-voltage transformer output is bad, needs to be replaced . If you have two electrodes discharge outlet sparking phenomenon, indicating a high voltage transformer , no problem , but a bad connection electrode and the socket , or the electrodes themselves there is leakage , poor contact phenomenon, should be repaired .
( Four ) , copy after copy appears bottom ash
On the copy depth ranging from bottom ash , electrostatic copier is a common phenomenon , but also a difficult problem to solve , the presence or absence of a copy of one of the bottom ash is to identify the presence of an important indicator of good or bad quality .
Cause and Remedy :
1 . Underexposed reasons, including exposure lamp aging , illumination fall ; Light bottle open too small , a small amount of exposure . Adjust the exposure voltage , light exposure slit lamp or replacement ;
2 . Original contrast is too small ;
3 . Copy paper damp ;
4 . Developing bias is too low or no developing bias ; developing bias adjustment , maintenance developing bias circuit .
5. Developer in a small proportion of the carrier , the high proportion of toner , resulting in uniform bottom ash , but more concentrated . The reason is that too much toner is free carrier absorption is difficult . This time to re-adjust the ratio of carrier and toner .