|
Analysis of maintenance : Up flip open the front panel key , open the front panel , the cutter is located on the front of the site . Remove the cutter guard left of the screw after removing the protective cover cutter , cutter knife was found that a short recording paper jam ( paper cut ever ) . Cutter pulled it counterclockwise to the maximum opening position , put the recording paper , reboot the fault persists. The barn wedge off left and right sides of the paper were pulled to the left and right direction , a slight increase of the paper warehouse , remove the bottom cover on the left of the phone , adjusting gear to allow the cutter to complete a full cutting action. Then turn on the power , paper cutter knife normal troubleshooting.6aYservice manual download site
Analysis machine jams are caused by :
( 1 ) When the roll of recording paper runs out , because at this time of the recording paper curl severe , resulting in poor recording paper output ;
( 2 ) Because the machine is recording paper output from the machine at the end , the paper exit a short distance from the desktop , easily curled recording paper output , which can easily cause a paper jam. After the continuous paper jam cutting knife , causing the cutter can not be reset ( cut short after an alarm ) . Recommended when running out of recording paper , the other for the best roll ; booster and fax machines , to avoid failure again.
|