Laundry , the body issued a " pop" sound. The multi- fault collision or a washing machine is placed on the ground is not flat or four feet did not keep good contact with the ground between the laundry tub and housing. Then need to adjust the focus of the washing machine , place a smooth , or appropriate pads on the bottom four pads .mxCservice manual download site
     Laundry , Washing turning issued a " giggle" friction sound . Overhaul , can be placed in the water , hold the clothes to be checked. At this point , if there is still " giggle" grinding sound when rotating impeller , the impeller rotation is due to illustrate the bottom of the tub has caused friction , as then into clothing, the sound will be even greater . Failure may be due impeller screw loose , the impeller can be demolished , and then in the bottom of the shaft washer padded proper thickness to increase the gap between the impeller and the bottom of the barrel . Elimination of both collision or friction. If the outer grazing Washing laundry tub , you should remove the impeller , and then re- install the trim .

 2    1 2 Next Last