Take baked cavity glass turntable, turntable racks and other objects, the microwave over and let the bottom up, remove the middle of a plate, then remove the turntable motor. Check the motor has 220V voltage power connectors, indicates that the motor itself is faulty. Measured with a multimeter and found that the motor coil resistance is ∞, open, normal resistance is generally 10 ~ 20kΩ. Replacement of the motor, the turntable to work properly. This case is the result of a user into the kitchen where the microwave particularly wet, and do not have a microwave oven for a long, leaving the mold off the turntable motor coil failure caused by damage to the motor. Remind users to pay attention to the placement of the microwave oven environment.zB6service manual download site